iPhone 4S,iPhone problems

How to Resolve iPhone 4s Vibrator Problem?

How to Resolve iPhone 4s Vibrator Problem?

It is a known fact that not everyone gives a concerned eye to their Smartphone’s vibrator problem and this is mainly because of the fact that they can still operate their Smartphone to the fullest without the need of this function. But the fact is, if your Smartphone’s vibrator is giving you problems or is not working at all than it is highly recommended that you should get it fixed in first place, as it might affect other functions of your phone too!  Besides that, there are also times that you need your phone’s vibrator, especially when you are in some crowded space or if you are in some place where it is important for you to turn your phone into silent mode especially in University, Hospital, Library etc.

In the following lines you will get to know about different iPhone 4S vibrator problems along with theit manual and Hardware solution:

Problems

  • Phone not vibrating.
  • Low Vibration.
  • Random Vibration.

Workaround

The only thing that you can do in order to fix your phone’s vibrator manually is to go into settings and check whether Vibrator is “ON” or not, if it is “Off” turn it “ON”. Besides that you can also try going with restarting your phone, as most of the times it also resolves this vibrator problem.

Hardware Solution

Following is the Hardware solution for your iPhone 4s Vibrator Problem:

Remove flux cable for iPhone 4s vibrator

  • Remove back cover of your iPhone 4s and disconnect all the strips and cables in order to avoid any kind of damage.

iPhone 4S vibrator terminal

  • Remove iPhone 4s Motherboard and check Vibrator Terminals for any Physical or Water damage. Clean the vibrator terminals and re-check whether it is working or not.

iPhone 4s check vibrator terminals

  • Verify the Continuity of Vibrator terminals with the help of multi-meter, if it is faulty then replace the vibrator.

iPhone 4s vibrator terminal and capacitor

  • Clean the vibrator terminals and check.

iPhone 4s vibrator terminal capacitor

  • If the above thing doesn’t solves the problem then check both on board connection terminals for continuity with the help of a multi-meter. Connect one end of multi-meter terminal with Vibrator terminal and the other with its respective capacitor.  Check both terminals one by one, if:
    • The Connection is open put a jumper to restore the connection
    • If Capacitor is damaged, replace it.

If that doesn’t solve the problem then it must be Vibrator IC issue. In order to fix that, all you have to do is to:

iPhone 4s Vibrator IC

  • Reheat or Replace Network IC, this is surely going to solve your iPhone 4S vibrator problem if everything else fails.

Tags:

Leave a reply

required

required

optional


Time limit is exhausted. Please reload CAPTCHA.

  •